QUICK LINKS

• 
• Slate Sealer Pinjar
• Penetrating Slate Sealer Pinjar
• Outdoor Slate Sealer Pinjar
• Non Slip Sealer for Slate Pinjar
• Long Lasting Slate Sealer Pinjar
• Impregnating Slate Sealer Pinjar
• 
• Travertine Sealer Pinjar
• Best Travertine Sealer Pinjar
• Sealing Travertine Kitchens Pinjar
• Sealing Travertine Bathrooms Pinjar
• Sealing Travertine Pavers Pinjar
• 
• Limestone Sealer Pinjar
• Penetrating Limestone Sealer Pinjar
• Outdoor Limestone Sealer Pinjar
• Protect Limestone against Acid Attack
• Protect Limestone against Salt Attack

1. Home >
2. Removing Stains from Marble >
3. Perth >
4. Pinjar

Removing Stains from Marble Pinjar - Perth

As always, prevention is better than finding a cure in Pinjar, meaning that if you have sealed your marble, you should be able to wipe away any potential stain with ease, provided it hasn't been left too long.

It is crucial to NEVER use anything acidic such as vinegar or citrus on your marble in Pinjar, as it can cause etching or erosion of the surface.

If you do encounter a potential stain on your marble in Pinjar, you can try the following solutions.

Use a commercial poultice product in Pinjar

A poultice for marble stains typically consists of a mixture of ground chalk (whiting) and hydrogen peroxide, which can be found at hardware stores. Some variations may use a different chemical than hydrogen peroxide. Follow the instructions provided with the product as a general guide:

• Wet the poultice with distilled water in Pinjar.
• Apply the poultice to the stain or stained area on the marble.
• Leave it in place for 48 hours to allow it to dry and absorb into the marble.
• After 48 hours, rinse off the poultice. The stain should have disappeared.
• Finally, reseal the marble with a penetrating sealer in Pinjar

As marble is calcium-based, acidic substances such as vinegar and lemon juice should never be used in Pinjar.

When using any cleaning product on marble, ensure it is pH neutral in Pinjar.

Because of the calcium in marble and its porous nature, using acidic or harsh cleaners may scratch and damage the surface in Pinjar.

How to Clean Marble Floors in Pinjar

• Mix warm water and a pH neutral marble floor cleaner in a bucket
• Optionally, add 1 cup of cornflour to the mixture.
• Stir vigorously to ensure thorough mixing.
• Use this mixture to mop the marble floor, ensuring even coverage and gentle cleaning.

The cornflour helps to remove marks and stains from marble as it will help to draw out substances from the porous stone.

If the above techniques do not achieve the desired results, consider calling a professional cleaning company with specialized equipment and solutions for marble surfaces in Pinjar.

Tile Cleaners Pinjar is Pinjar's leading tile care provider for all marble cleaning needs, including marble floor cleaning, marble sealing, marble stripping and sealing, marble regrouting, grout color sealing, and minor marble repairs. If you require any marble cleaning or have questions regarding your marble, their friendly customer service team is very helpful.

Please note that any information provided is given in good faith and is believed by us to be appropriate and reliable for marble care. However, since conditions vary widely and are outside of our control, it is provided without liability or responsibility on our part. It is the responsibility of the recipient to decide if the information provided is appropriate for their marble situation. In case of doubt, any process should be tried out in an inconspicuous area prior to general application on marble surfaces.