THANK YOU FOR YOUR ENQUIRY

Dear
Thank you for your enquiry with StoneMaster, Australia's leading stone care specialist.
To help us best serve your enquiry, you can upload any photos that highlight areas of concern.

We're happy to answer any questions you may have, and will get back to you as soon as we can.
In the meantime, please feel free to contact us on 0478 085 801 or send us an email to [email protected]

Quick Links
outdoor limestone pavers Grey limestone flooring

QUICK LINKS

Finishes Available for Marble Ballarat North - Ballarat

While marbles and granites are often ground and polished to a high gloss, many types of marble are too soft for this process. In most cases, marble will be honed or ground to a flat or matte finish in Ballarat North. Honed marble has an almost chalky appearance to it, with little to no sheen.

There are, however, several other marble finishes available in Ballarat North. The processes and finishing applied can mean that a completely different look and effect can be achieved.

Different finishes are better suited to certain environments, situations, and tastes. Sawn

For marble in Ballarat North, one common finish is Sawn, which results in a comparatively rough surface. The natural stone is sawn without any other processes such as honing, tumbling, or flaming, and the saw marks are likely to be visible.

Polished

A smooth and reflective surface which brings out the full color and character of the marble. Less slip-resistant and generally reserved for indoor areas such as hotel receptions, tabletops, etc. Increasingly finer abrasives are used after the honing stage, and the stone is buffed to a high gloss.

 Ballarat North Marble-Matt-White-Floor-Tile

Antiqued/Tumbled

Antiqued/Tumbled: Tumbling is a common technique that distresses the edges and surface of marble by vibrating the stone in a bath of sand, grit, and sometimes acid. The result is a finish that looks aged and worn.

Honed

This method is a less aggressive approach than grinding, although similar. Marble is ground and sanded using coarse grit abrasives to create a smooth but satin, non-reflective finish—a satin-smooth surface with little or no gloss.

Ground

A very aggressive approach to refinishing marble. It uses a metal-bonded and diamond grit heavy weighted floor buffer to remove deep scratches and lippage. The goal is to flatten the floor and smooth out imperfections, often followed by honing and polishing.

Brushed

Steel or hard nylon brushes are used with water to brush and wear out softer parts of the marble, creating a textured finish. Provides an antique look to the stone.

Sandblasted

A textured surface is created as sand is blasted at high pressure. The process often lightens the marble and masks its character by hiding the veins and fossils within the stone. Shot-blasting is a similar process.

 Ballarat North luxury seal Marble tiles
Bush-Hammered

A high anti-slip finish can be achieved using this technique, where a bush hammer is applied by machine or hand at high impact to pit the surface of the marble.

Chiselled

Lines are mechanically chiselled into the marble to create an anti-slip finish.

StoneMaster has the expertise and ability to resurface your marble, to remove scratches and etches and create the look you want.

In most situations with normal wear on marble, a simple polish will restore the sheen.

In cases with heavy wear and etches, StoneMaster can resurface the area in Ballarat North, remove all scratches and etches, and then polish with a polishing compound to restore the original finish of the marble.

 Ballarat North sealing-of-Gold-Marble

Please wait...